HOME PRODUCTS SPECIAL OFFERS PAY ONLINE CONTACT US

Helicoil

Thread Cutting Tools

Threaded Inserts

Download
Product Catalogues

EZLOKBrochure.pdf

E-ZLOK Dimensions.pdf

	Mechanical_Properties.pdf
	Loctite Spec Sheet.pdf

Pay Online

E-Z LOK threaded inserts have standard size/pitch threads so they can be installed using standard tools you probably already have in your toolbox. For example, if an E-Z LOK with a 1/2-13 external thread is being installed, the user simply drills the hole with a standard 27/64 drill and then taps the hole with a standard 1/2-13 tap. Once that’s done, the insert is threaded into the hole like an ordinary fastener using a screwdriver, bolt and jam nut, or an E-Z LOK drive tool.

E-Z LOK threaded inserts for metal are installed using standard tools. Simply drill the appropriately sized hole with a standard drill tap the hole with a standard tap and then turn in the E-Z LOK like an ordinary fastener with a screwdriver, bolt and jam nut, or an E-Z LOK drive tool. Installation is as easy as 1-2-3.

1. Drill hole with standard drill.

2. Tap hole with standard tap.

3. Turn insert home flush with screwdriver, bolt and jam nut, or E-Z LOK driver tool.

Power drive tools are available for high volume installation. See insert tables for catalog numbers and sizes.

E-Z LOK inserts are self-locking upon installation, pre-applied Loctite on the external threads begins to set and the newly installed insert is fastener ready in minutes. At full cure 72 hours, the Loctite seals against liquids and gases to pressures of 6,000 psi.

E-Z LOK threaded inserts can be removed easly with a bolt extractor or by heating the inserts to over 300 Deg. F.

CARBON STEEL THREAD INSERTS

Carbon Steel E-Z LOK Thread Inserts are available in various Inner Diameter (ID) and Outer Diameter (OD) Combinations such as

UNC ID/ UNC OD

UNF ID/ UNF OD

Metric ID/ Metric OD

Metric ID/ UNC OD

UNC ID/Metric OD

Extra Heavy Wall, Automotive

For Details of different ID/OD Combinations Please download E-Z LOK CATOLOGUE.

STAINLESS STEEL THREAD INSERTS

Stainless Steel E-Z LOK Thread Inserts are available in various Inner Diameter (ID) and Outer Diameter (OD) Combinations such as

UNC ID/ UNC OD

UNF ID/ UNF OD

Metric ID/ Metric OD

Metric ID/ UNC OD

For Details of different ID/OD Combinations Please download E-Z LOK CATOLOGUE.

Home Privacy Policy Terms of Use Disclaimer Contact Us Sitemap

Designed & Developed by Satya Web Solutions